Sort siliciumcarbid
Sort siliciumcarbid
Black Silicon Carbide is the product of silicon quartz sand and petroleum coke electrofused at high temperature in an electrical resistance furnace. The grains of Black Silicon Carbide are hexagonal crystals that are extremely hard, skarp, and friable, and have outstanding electrical and thermal conductivity and low thermal expansion.
Introduction
Black Silicon Carbide is the product of silicon quartz sand and petroleum coke electrofused at high temperature in an electrical resistance furnace. The grains of Black Silicon Carbide are hexagonal crystals that are extremely hard, skarp, and friable, and have outstanding electrical and thermal conductivity and low thermal expansion.
Tilgængelig størrelse
- Black Silicon Carbide Split
- 6x8, 10x16, 16x35, 35x70, 30x60...
- Sort siliciumcarbidmakro -gryn
- F12- F220, P12- P220
- Sort siliciumcarbidmikropulver
- F230- F1200, p240- P1200
Parameter
| Punkt | F Grit | Kemisk sammensætning (%) | Størrelsesfordeling (%) | Bulkdensitet (g/cm3) | |||||||||||||
| Sic (% min) | Fe2O3 (% max) | F.C. (% max) | D3 | D50 | D94 | ||||||||||||
| Marco Grits | F24 | 98.50% | 0.20% | 0.20% | / | / | / | 1.43-1.53 | |||||||||
| F30 | 98.50% | 0.20% | 0.20% | / | / | / | 1.44-1.54 | ||||||||||
| F36 | 98.50% | 0.20% | 0.20% | / | / | / | 1.46-1.56 | ||||||||||
| F40 | 98.50% | 0.20% | 0.20% | / | / | / | 1.46-1.56 | ||||||||||
| F46 | 98.50% | 0.20% | 0.20% | / | / | / | 1.49-1.59 | ||||||||||
| F54 | 98.50% | 0.20% | 0.20% | / | / | / | 1.49-1.59 | ||||||||||
| F60 | 98.50% | 0.20% | 0.20% | / | / | / | 1.49-1.59 | ||||||||||
| F70 | 98.50% | 0.20% | 0.20% | / | / | / | 1.47-1.57 | ||||||||||
| F80 | 98.50% | 0.20% | 0.20% | / | / | / | 1.46-1.56 | ||||||||||
| F90 | 98.50% | 0.20% | 0.20% | / | / | / | 1.41-1.51 | ||||||||||
| F100 | 98.50% | 0.20% | 0.20% | / | / | / | 1.48-1.58 | ||||||||||
| F120 | 98.50% | 0.20% | 0.20% | / | / | / | 1.48-1.58 | ||||||||||
| F150 | 98.00% | 0.25% | 0.25% | / | / | / | 1.37-1.47 | ||||||||||
| F180 | 98.00% | 0.25% | 0.25% | / | / | / | 1.34-1.44 | ||||||||||
| F220 | 98.00% | 0.25% | 0.25% | / | / | / | 1.29-1.39 | ||||||||||
| Mikro pulver | F240 | ≥99 | ≤0,15 | ≤0,15 | ≤70 | 44.5±2,0 | ≥34 | 1.36-1.5 | |||||||||
| F280 | ≥99 | ≤0,15 | ≤0,15 | ≤59 | 36.5±1,5 | ≥28 | 1.23-1.4 | ||||||||||
| F320 | ≥99 | ≤0,15 | ≤0,15 | ≤49 | 29.2±1,5 | ≥22 | 1.3-1.4 | ||||||||||
| F360 | ≥99 | ≤0,15 | ≤0,15 | ≤40 | 22.8±1,5 | ≥12 | 1.12-1.35 | ||||||||||
| F400 | ≥99 | ≤0,15 | ≤0,15 | ≤32 | 17.3±1,0 | ≥8 | 1.01-1.21 | ||||||||||
| F500 | ≥98,5 | ≤0,15 | ≤0,15 | ≤25 | 12.8±1,0 | ≥5 | 1.0-1.2 | ||||||||||
| F600 | ≥98,5 | ≤0,15 | ≤0,15 | ≤19 | 9.3±1,0 | ≥3 | 0.9-1.18 | ||||||||||
| F800 | ≥98,5 | ≤0,15 | ≤0,15 | ≤14 | 6.5±1,0 | ≥2 | 0.7-1.0 | ||||||||||
| F1000 | ≥98 | ≤0.20 | ≤0.20 | ≤10 | 4.5±0,8 | ≥1 | 0.6-0.7 | ||||||||||
| F1200 | ≥97.5 | ≤0.25 | ≤0.25 | ≤7 | 3.0±0,5 | ≥1 | 0.5-0.68 | ||||||||||
HSA silicon carbide complies with GB∕T 2480-2022 General Abrasive Silicon Carbide national standard
| Punkt | P Grit | Sic (% min) | Fe2O3 (% max) | F.C. (% max) | ||||||||
| Marco Grits | P16-80 | 99.00% | 0.15% | 0.15% | ||||||||
| P100 | 99.00% | 0.15% | 0.15% | |||||||||
| P120-150 | 98.50% | 0.20% | 0.20% | |||||||||
| P180-220 | 98.50% | 0.20% | 0.20% | |||||||||
| Mikro pulver | P240-280 | 98.50% | 0.20% | 0.20% | ||||||||
| P320-360 | 98.50% | 0.20% | 0.20% | |||||||||
| P400-500 | 98.50% | 0.20% | 0.20% | |||||||||
| P600-800 | 98.50% | 0.20% | 0.20% | |||||||||
| P1000-1200 | 98.00% | 0.25% | 0.25% | |||||||||
| P1500-2000 | 98.00% | 0.25% | 0.25% | |||||||||
| P2500-3000-4000 | 97.50% | 0.30% | 0.30% | |||||||||
| P5000 | 97.50% | 0.30% | 0.30% | |||||||||
HSA silicon carbide complies with GB∕T 2480-2022 General Abrasive Silicon Carbide national standard
Benefits
Høj hårdhed
Chemical Inertness
Slibende
Abrasion Resistance
Høj termisk ledningsevne
Low Coefficient of Thermal Expansion
Thermal Shock Resistance
Strength at High-Temperature Ranges
Applikationer
Emballage
Vi kan tilbyde 1MT/25Kg vævede plastikposer, og 25 kg papirsposer.
Our Black Silicon Carbide is carefully handled during storage and transportation to preserve the quality of our product in its original condition.
Sort siliciumcarbid
Sort siliciumcarbid er et meget brugt slibende produkt, Med fremragende slidstyrke, høj hårdhed, høj densitet, lave urenheder og andre fordele, Almindeligt anvendt til slibning af sandblibning, polering, Gratis slibning, gør forskellige slibemidler, osv.
Grønt siliciumcarbid
Grønt siliciumcarbid er lavet af kvartssand og petroleumskoks raffineret i en modstandsovn, På grund af dets relativt stabile kemiske egenskaber, høj termisk ledningsevne, Lav koefficient for termisk ekspansion, og god slidstyrke.
Kontakt os
Få et tilbud
E -mail -adresse
sales@superior-abrasives.com
+86-18638638803
Adresse
No.68 Zhengtong Road, Zhengzhou, Henan, Kina