Svart silisiumkarbid
Svart silisiumkarbid
Black Silicon Carbide is the product of silicon quartz sand and petroleum coke electrofused at high temperature in an electrical resistance furnace. The grains of Black Silicon Carbide are hexagonal crystals that are extremely hard, sharp, and friable, and have outstanding electrical and thermal conductivity and low thermal expansion.
Introduction
Black Silicon Carbide is the product of silicon quartz sand and petroleum coke electrofused at high temperature in an electrical resistance furnace. The grains of Black Silicon Carbide are hexagonal crystals that are extremely hard, sharp, and friable, and have outstanding electrical and thermal conductivity and low thermal expansion.
Available Size
- Black Silicon Carbide Split
- 6x8, 10x16, 16x35, 35x70, 30x60...
- Svart silisiumkarbid makrokorn
- F12- F220, P12- P220
- Svart silisiumkarbid mikropulver
- F230- F1200, P240- P1200
Parameter
| Item | F Grit | Chemical Composition (%) | Size Distribution (%) | Bulkdensitet (g/cm3) | |||||||||||||
| Sic (% min) | Fe2O3 (% max) | F.C.. (% max) | D3 | D50 | D94 | ||||||||||||
| Marco Grits | F24 | 98.50% | 0.20% | 0.20% | / | / | / | 1.43-1.53 | |||||||||
| F30 | 98.50% | 0.20% | 0.20% | / | / | / | 1.44-1.54 | ||||||||||
| F36 | 98.50% | 0.20% | 0.20% | / | / | / | 1.46-1.56 | ||||||||||
| F40 | 98.50% | 0.20% | 0.20% | / | / | / | 1.46-1.56 | ||||||||||
| F46 | 98.50% | 0.20% | 0.20% | / | / | / | 1.49-1.59 | ||||||||||
| F54 | 98.50% | 0.20% | 0.20% | / | / | / | 1.49-1.59 | ||||||||||
| F60 | 98.50% | 0.20% | 0.20% | / | / | / | 1.49-1.59 | ||||||||||
| F70 | 98.50% | 0.20% | 0.20% | / | / | / | 1.47-1.57 | ||||||||||
| F80 | 98.50% | 0.20% | 0.20% | / | / | / | 1.46-1.56 | ||||||||||
| F90 | 98.50% | 0.20% | 0.20% | / | / | / | 1.41-1.51 | ||||||||||
| F100 | 98.50% | 0.20% | 0.20% | / | / | / | 1.48-1.58 | ||||||||||
| F120 | 98.50% | 0.20% | 0.20% | / | / | / | 1.48-1.58 | ||||||||||
| F150 | 98.00% | 0.25% | 0.25% | / | / | / | 1.37-1.47 | ||||||||||
| F180 | 98.00% | 0.25% | 0.25% | / | / | / | 1.34-1.44 | ||||||||||
| F220 | 98.00% | 0.25% | 0.25% | / | / | / | 1.29-1.39 | ||||||||||
| Mikropulver | F240 | ≥99 | ≤0.15 | ≤0.15 | ≤70 | 44.5±2.0 | ≥34 | 1.36-1.5 | |||||||||
| F280 | ≥99 | ≤0.15 | ≤0.15 | ≤59 | 36.5±1.5 | ≥28 | 1.23-1.4 | ||||||||||
| F320 | ≥99 | ≤0.15 | ≤0.15 | ≤49 | 29.2±1.5 | ≥22 | 1.3-1.4 | ||||||||||
| F360 | ≥99 | ≤0.15 | ≤0.15 | ≤40 | 22.8±1.5 | ≥12 | 1.12-1.35 | ||||||||||
| F400 | ≥99 | ≤0.15 | ≤0.15 | ≤32 | 17.3±1.0 | ≥8 | 1.01-1.21 | ||||||||||
| F500 | ≥98,5 | ≤0.15 | ≤0.15 | ≤25 | 12.8±1.0 | ≥5 | 1.0-1.2 | ||||||||||
| F600 | ≥98,5 | ≤0.15 | ≤0.15 | ≤19 | 9.3±1.0 | ≥3 | 0.9-1.18 | ||||||||||
| F800 | ≥98,5 | ≤0.15 | ≤0.15 | ≤14 | 6.5±1.0 | ≥2 | 0.7-1.0 | ||||||||||
| F1000 | ≥98 | ≤0.20 | ≤0.20 | ≤10 | 4.5±0.8 | ≥1 | 0.6-0.7 | ||||||||||
| F1200 | ≥97.5 | ≤0.25 | ≤0.25 | ≤7 | 3.0±0.5 | ≥1 | 0.5-0.68 | ||||||||||
HSA silicon carbide complies with GB∕T 2480-2022 General Abrasive Silicon Carbide national standard
| Item | P Grit | Sic (% min) | Fe2O3 (% max) | F.C.. (% max) | ||||||||
| Marco Grits | P16-80 | 99.00% | 0.15% | 0.15% | ||||||||
| P100 | 99.00% | 0.15% | 0.15% | |||||||||
| P120-150 | 98.50% | 0.20% | 0.20% | |||||||||
| P180-220 | 98.50% | 0.20% | 0.20% | |||||||||
| Mikropulver | P240-280 | 98.50% | 0.20% | 0.20% | ||||||||
| P320-360 | 98.50% | 0.20% | 0.20% | |||||||||
| P400-500 | 98.50% | 0.20% | 0.20% | |||||||||
| P600-800 | 98.50% | 0.20% | 0.20% | |||||||||
| P1000-1200 | 98.00% | 0.25% | 0.25% | |||||||||
| P1500-2000 | 98.00% | 0.25% | 0.25% | |||||||||
| P2500-3000-4000 | 97.50% | 0.30% | 0.30% | |||||||||
| P5000 | 97.50% | 0.30% | 0.30% | |||||||||
HSA silicon carbide complies with GB∕T 2480-2022 General Abrasive Silicon Carbide national standard
Benefits
Høy hardhet
Chemical Inertness
Slipende
Abrasion Resistance
Høy termisk ledningsevne
Low Coefficient of Thermal Expansion
Thermal Shock Resistance
Strength at High-Temperature Ranges
Applikasjoner
Emballasje
Vi kan tilby 1MT/25Kg vevde plastposer, og 25 kg papirposer.
Our Black Silicon Carbide is carefully handled during storage and transportation to preserve the quality of our product in its original condition.
Svart silisiumkarbid
Svart silisiumkarbid er et mye brukt slipende produkt, med utmerket slitasje motstand, høy hardhet, høy tetthet, lave urenheter og andre fordeler, ofte brukt i sandblåsende sliping, polere, gratis sliping, lage forskjellige slipemidler, osv.
Grønt silisiumkarbid
Grønt silisiumkarbid er laget av kvartssand og petroleumskoks foredlet i en motstandsovn, På grunn av sine relativt stabile kjemiske egenskaper, Høy varmeledningsevne, Lav termisk ekspansjonskoeffisient, og god slitasje motstand.
Kontakt oss
Få et tilbud
E -postadresse
sales@superior-abrasives.com
+86-18638638803
Adresse
No.68 Zhengtong Road, Zhengzhou, Henan, Kina